 unprocessed plastic materials (slab and round bar) are generic names
of those to be used for machining which have been researched, developed
and manufactured with the aim of improving plastic extrusion molding techniques
and the quality demanded by users based on the long experience of Daiwa Giken
Industrial Co.,Ltd.
slab materials are standard products consisting of ether type resins and
ester type resins as well as polyolefine type resins, which have been utilized
in a wide range of fields including industrial parts where respective superior
characteristics of resins are needed.
We also offer special materials (e.g. heat resistant, nonflammable, glass
reinforced, and metal added grades ,etc.) and products of special sizes by
special order that can be delivered in a short period of time. please contact
us directly for more information.
|
 |
Advantages of selecting unprocessed plastic materials for machining
1.Amounts to be used are not as great as that produced by mass-production
injection molding.
2.Frequent changes in shape and specifications.
3.For materials that require delivery in a short period of time.
4.Dimensional accuracy is not satisfactory through injection molding.
5.When a product is manufactured by injection molding, problems arise with
the design (wall thickness, eccentricity, undercutting, etc.)
6.Due to characteristics of the plastic, injection molding is not applicable.
7.When it is desired to produce a small amount of multiple products as prototypes.
|
|
